8 FACTORS AFFECTING SETTING & HARDENING OF CEMENT


FACTORS AFFECTING THE SETTING AND HARDENING OF PORTLAND CEMENT

(1) THE IMPACT OF CEMENT’S COMPOSITION

The mineral composition of cement and their ratios are the main factors affecting the setting and hardening of cement. As mentioned above, various mineral components will reveal different characteristics when reacting with water. For example, the increase of C3A can speed up the setting and hardening rate of cement, and the heat of hydration is high at the same time.
Generally speaking, if mixed materials are added into the cement clinker, the anti-erosion will increase, and the heat of hydration and the early strength will decrease.

(2) THE MIXING AMOUNT OF GYPSUM

Gypsum is called the retarding agent of cement which is mainly used for regulating the setting time of cement and is an indispensable component. Without gypsum, cement clinker can condense immediately by mixing with water and release heat. The major reason is that C3A in the clinker can dissolve in water quickly to generate a kind of calcium aluminate hydrate, a clotting agent, which will destroy the normal use of cement. The retardation mechanism of gypsum is: when cement is hydrated, gypsum reacts with C3A quickly to generate calcium sulfoaluminate hydrate which deposits and forms a protection film on the cement particles to hinder the hydration of C3A and delay the setting time of cement.
If the content of gypsum is too little, the retardation affect will be unobvious. Too much gypsum will accelerate the setting of cement because gypsum can generate a clotting agent itself. The appropriate amount of gypsum depends on the content of C3A in the cement and that of SO3 in gypsum, and it also related to the fineness of cement and the content of SO3 in clinker. The amount of gypsum should account for 3%-5% of the cement’s mass. If the content of gypsum exceeds the limit, it will lower the strength of cement and it can even lead to poor dimensional stability, which will cause the expanded destruction of cement paste. Thus, the national standard requires that the content of SO3 should not be more than 3.5%.

(3) THE IMPACT OF CEMENT’S FINENESS

The size of cement particles directly affects the hydration, setting and hardening, strength and heat of hydration.
The finer the cement particles are, the larger the total surface area is and the bigger the area contacting with water is. Thus, the hydration will be quick, the setting and hardening will be accelerated correspondingly, and the early strength will be high.
However, if the cement particles are too small, it is easy for them to react with the water and the calcium dioxide in the air to destroy the storage of cement. If the cement is too fine, its shrinkage is large in the hardening process. Thus, the finer the cement is ground, the more energy will lose and the higher the cost will be. Usually, the grain size of the cement particles is within 7-200pm (0.007-0.2mm).

(4) THE IMPACT OF CURING CONDITIONS

The curing environment has sufficient temperature and moisture which is conducive to the hydration and setting and hardening process of cement and benefits the development of the early strength. If the moisture of the environment is very dry, the water in the cement will evaporate, leading to insufficient hydration and ceasing of the hardening. Serious cracks will happen sometimes.
Usually, the temperature rises at the time of curing, and the hydration of cement and the development of early strength become fast. If the hardening process occurs at a low temperature, the final strength won’t be affected though the development of the strength is slow. But if the temperature is under 00C, the hydration of cement will stop and the strength will not only stop growing but also destroy the structure of cement paste due to the condensation of water.
In actual projects, the setting and hardening process of cement products is accelerated by steam curing and autoclave curing.

(5) THE IMPACT OF CURING AGE

The hydration and hardening of cement is an ongoing process in a long period. With the increase of the hydrating degree of various clinker minerals in cement particles, gels will grow and capillary porosities will decrease, which enables the strength to rise with the increase of age. It is proved that cement develops rapidly within 28d and slowly after 28d.
Building materials in civil engineering

(6) THE IMPACT OF THE MIXING WATER CONTENT

If the cement consumption is unchanged, the increase of the mixing water content will enhance the amount of capillary porosities, lower the strength of cement paste, and extend the setting time. Therefore, in practical projects, the amount of water and cement will be changed without modifying the water-cement ratio (the minimum amount of cement is regulated to ensure the durability of concrete) when the liquidity of cement concrete is adjusted.

(7) THE IMPACT OF ADMIXTURE

Hydration, setting, and hardening of Portland cement are constrained by C3S, C3A. And all the admixtures that affect the hydration of C3S, C3A can change the performance of the hydration, the setting and hardening of Portland cement. For example, the accelerator agents (such as CaC12, Na2S04) can accelerate the hydration and the hardening of cement and improve its strength. On the contrary, the retarding agents (such as calcium lignosulphonate) can delay hydration and hardening of cement and affect the development of the early strength.

(8) THE IMPACT OF STORAGE CONDITIONS

The inappropriate storage will expose cement to moisture. The particle surfaces agglomerate because of hydration which seriously reduces the intensity. Slow hydration and carbonization will happen due to the impact of the water and C02 in the air, even though the storage is good.
The strength decreases by 10%-20% after 3 months, by 15%-30% after 6 months, by 25%-40% after 1 year, so the effective storage period of cement is 3 months and the cement should not be stored for a long time.

Comments

Post a Comment

Popular posts from this blog

40+ Construction Tools List with Images for Building Construction

Image
Construction tools list for building construction works such as concrete, brick masonry, leveling, wood works, floor works, slab works, brick laying, plastering etc. is provided. Every construction tool is necessary to achieve good results in the whole project. Along with these tools, the workers should also use some safety tools to prevent them from the unexpected accidents. Construction Tools List for Building Construction Some important construction tools and their uses are listed below: Bolster Boning rod Brick hammer Bump cutter/screed Chisel Circular saw Concrete mixer Cordless drill Crowbar Digging bar End frames Float Gloves Hand saw Helmet Hoe Iron pan Jack plane Ladder Line and pins Mason’s square Measuring box Measuring tape Measuring wheel Pick axe Plumb bob Plumb rule Polishers Putty knife Rammer Rubber Boots Safety glasses Safety helmet Sand screen machine Scratchers Sledge hammer Spade Spirit level Straight edge brushes Til
Read more

Building Materials properties and their Importance in Construction

Image
Building materials or construction materials are the major requirement in this modern age of technology. There are many types of building materials used for different construction works. Properties of Building Materials For a material to be considered as building material, it should have required engineering properties suitable for construction works. These properties of building materials are responsible for its quality and capacity and helps to decide applications of these material. Such properties of building materials are categorized as follows. Physical properties Mechanical properties Chemical properties Electrical properties Magnetic properties Thermal properties Physical Properties of Building Materials These are the properties required to estimate the quality and condition of the material without any external force. The physical properties of engineering materials are as follows. Bulk density Porosity Durability Density Density index Specific gravity
Read more

How to Prevent Errors During Setting Out Building Plan on Ground?

Image
Setting out building plan on ground is one of the most significant steps in building constructions and any errors at this stage would cause considerable problems, if it is not tackled immediately. Errors During Setting Out Building Plan on Ground There are different types of errors that might be made when a structure is set out for example gross errors, systematic errors and random errors. These errors should be prevented and there are some measures to tackle these issues. These measures will be discussed in the following sections. Fig.1: Setting Out of Building Plan on Ground Fig.2: Setting Out Building Plan on Ground How to Prevent Errors During Setting Out of Building? Following are the different types of control that should be carried out to prevent any errors during setting out building plan on ground: Good practice in office On site control Equipment and staff Checks Marking the ground Use of grid offset Good Practice in Office To successfully set
Read more

Factors Affecting Selection of Foundation for Buildings?

Image
Factors which affect selection of foundation for a building can be many from the soil conditions to the type of structure and loads from the building. All the factors are considered during selection of foundation for durable building construction. Factors Affecting Selection of Foundation Following are the factors which affect the selection of suitable foundations for building construction: Loads from building Type of soil Type of structures in neighborhood Type of foundations 1. Loads from Building The first factor considered is loads from building on the foundation. This load is a combination of dead load and imposed loads on the buildings. Other loads such as wind loads, earthquake loads, snow loads etc. are also considered based on location. The quantity of loads depends on the type of structure, number of floors and material of construction. As the number of floors increases, the dead load and imposed loads also increase. Choice of material for construction su
Read more

Ceiling types used in Building Construction and their Applications

Image
Various types of ceiling are used in building construction. Applications, aesthetics, advantages and disadvantages of these types of ceilings are discussed in this article. The ceiling of a building form one of the most important structural elements it terms of functionality as well as creativity which in turn bring good aesthetics to the building interior. This document would help you understand ceilings that in turn would help you understand the most suitable options while undertaking either repair or renovation work of our building interior. The ceiling gains a definition, ” A part of a building which encloses and is exposed overhead in a room, protected shaft or circulation space.” It helps us to create an enclosure and separation between spaces. They provide perfect lighting in the room by controlling diffusion of light. It also controls the sound around a room by making the room sound proof. It, therefore, stops the passage of sound between the rooms. Now ceiling also po
Read more

HOW TO DETERMINE DEPTH OF FOUNDATION

Image
Many factors affects the determination of depth of foundation. Calculation for foundation depth is done based on type of soil, ground water table, loads from structure, bearing capacity of soil and other factors. General factors to be considered for determining depth of foundation are: 1. Load applied from structure to the foundation 2. Bearing capacity of soil 3. Depth of water level below the ground surface 4. Types of soil and depth of layers in case of layered soil 5. Depth of adjacent foundation The minimum depth of foundation should be considered to ensure that the soil is having the required safe bearing capacity as assumed in the design. However, it is advised to carry out soil investigation before deciding on depth of foundation. Soil investigation report will suggest the foundation depth based on the type of structure, soil properties, depth of water table, and all other variable that should be considered. Soil investigation report provides bearing capacity of
Read more

WHAT IS VOLUME BATCHING OF CONCRETE AND HOW IT IS DONE IN FIELD?

Image
WHAT IS VOLUME BATCHING OF CONCRETE? Batching of concrete means measuring different ingredients of concrete (i.e. cement, sand, coarse aggregate and water) before mixing it. When this measurement is done on the basis of volume, we call it  Volume Batching . Below are mentioned some of important points to remember before adopting volume batching method in field. Volume batching is not a good method for measuring concrete materials. It is not applicable in case of reinforced concrete structure. This method of concrete batching may not be economical. It can be only used for unimportant concrete or for small concrete works. HOW VOLUME BATCHING IS DONE IN FIELD? Before batching concrete ingredients in terms of volume, we need to know two things. What is the relative proportion of concrete ingredients in terms of volume? What is the water-cement ratio? After knowing these two things you can proceed to batch concrete ingredients in field. The table shown below can be
Read more

Construction Project Management Softwares

Image
Construction PM Software A new wave of web and cloud apps are streamlining communication, simplifying document management, and improving efficiency in construction management.  Here are some of top construction management tools: Smartsheet Smartsheet  is a spreadsheet-inspired work management tool with robust collaboration and communication features. With pre-built construction templates, it’s easy to create a timeline, track progress, manage documents, and organize the details. Gantt charts are automatically created and auto-adjust every time a change is made, so you can share the most up-to-date timeline with team members or stakeholders. You can upload files from your computer, Google Drive, Box, Dropbox, Evernote, or add a web URL, creating a central repository for all project documentation and contracts. Team members can have discussions directly in the sheet and set reminders and alerts, so everyone is on the same page. And lastly, Smartsheet integrates with ot
Read more

Methods of underpinning, Procedure and Applications in Foundation Strengthening

Image
Underpinning is a method for repair and strengthening of building foundations. Underpinning methods, procedures and their applications in strengthening of different types of foundations is discussed in this article. There are situations where a failure in foundation or footing happens unexpectedly after the completion of whole structure (both sub and superstructure). Under such emergency situation, a remedial method has to be suggested to regain the structural stability. The  method of underpinning  help to strengthen the foundation of an existing building or any other infrastructure. These involve installation of permanent or temporary support to an already held foundation so that additional depth and bearing capacity is achieved. Selection of Underpinning Methods Underpinning methods are selected based on age of structure and types of works involved. Structure categories based on its age: Ancient Structures :Age greater than 150 years Recent Structures : Age between 5
Read more

Methods for Calculating Cost of Engineering Consultant Services

Image
here are several methods by which calculation of engineering consultant services cost can be carried out in construction. It is possible to employ various charging approach at different phase of the consultant services. The application of each method or combination of methods is dependent on nature, scope and complexity of the required engineering services. In this article, these charging consulting services are discussed. Following are the topics discussed for calculating cost of engineering services or consulting services in construction: What are the factors that affect the engineering service cost? Methods for charging engineering services What are the Factors that affect the Engineering Service Cost in Construction? There are various factors that control the cost of engineering services required for a specific project. These factors are outlined below: The conditions at project site. Degree of danger that may be encountered and exposure possibility. System of pr
Read more