HOW TO CLASSIFY SOIL SAMPLES BASED ON SAMPLING METHOD?

HOW TO CLASSIFY SOIL SAMPLES BASED ON SAMPLING METHOD?

NEED FOR SOIL SAMPLING

A satisfactory design of a foundation depends upon the accuracy with which the various soil parameters required for the design are obtained. The accuracy of the soil parameters depends upon the accuracy with which representative soil samples are obtained from the field.
Sampling is carried out in order that soil and rock description, and laboratory testing can be carried out.
Laboratory tests typically consist of:
  • Index tests (for example, specific gravity, water content)
  • Classification tests (for example, Atterberg’s limit tests on clayey soil); and
  • Tests to determine engineering design parameters (for example strength, compressibility, and permeability).

FACTORS TO BE CONSIDERED WHILE SAMPLING SOIL

  1. i) Samples should be representative of the ground from which they are taken.
  2. ii) They should be large enough to contain representative particles sizes, fabric, and fissuring and fracturing.
iii) They should be taken in such a way that they have not lost fractions of the in situ soil (for example, coarse or fine particles) and, where strength and compressibility tests are planned, they should be subject to as little disturbance as possible.

TYPE OF SOIL SAMPLES

Types of Soil Samples
Types of Soil Samples
Non-Representative
Non-Representative soil samples are those in which neither the in-situ soil structure, moisture content nor the soil particles are preserved.
  • They are not representative
  • They cannot be used for any tests as the soil particles either gets mixed up or some particles may be lost.
  • Samples that are obtained through wash boring or percussion drilling are examples of non-representative samples
Disturbed soil samples
Disturbed soil samples are those in which the in-situ soil structure and moisture content are lost, but the soil particles are intact.
  • They are representative
  • They can be used for grain size analysis, liquid and plastic limit, specific gravity, compaction tests, moisture content, organic content determination and soil classification test performed in the lab
  • e.g., Examples of such sample are those obtained through cuttings while auguring, grab, split spoon (SPT), etc.
Undisturbed soil samples
Undisturbed soil samples are those in which the in-situ soil structure and moisture content are preserved.
  • They are representative and also intact
  • These are used for consolidationpermeability or shear strengths test (Engineering properties)
  • More complex jobs or where clay exists
  • In sand is very difficult to obtain undisturbed sample
  • Obtained by using Shelby tube (thin wall), piston sampler, surface (box), vacuum, freezing, etc

Comments

Popular posts from this blog

40+ Construction Tools List with Images for Building Construction

Building Materials properties and their Importance in Construction

How to Prevent Errors During Setting Out Building Plan on Ground?

Factors Affecting Selection of Foundation for Buildings?

Ceiling types used in Building Construction and their Applications

WHAT IS VOLUME BATCHING OF CONCRETE AND HOW IT IS DONE IN FIELD?

HOW TO DETERMINE DEPTH OF FOUNDATION

Methods of underpinning, Procedure and Applications in Foundation Strengthening

Construction Project Management Softwares

Methods for Calculating Cost of Engineering Consultant Services